Part Number Hot Search : 
286015C1 167BZXI KIA78 SMP10G DM74AL MA786H UM600 CR200
Product Description
Full Text Search
 

To Download MCM67T415 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MCM67T415/D
Advance Information
MCM67T415
16K x 15 Bit Cache Tag RAM for PentiumTM Processors
The MCM67T415 is a 245,760 bit cache-tag static RAM designed to support Pentium microprocessors at bus speeds up to 66 MHz. It is organized as 16K words of 15 bits each and is fabricated using Motorola`s high performance, silicon gate BiCMOS technology. There are twelve common I/O tag bits and three separate I/O status bits. A 12-bit comparator is on-chip to allow fast comparison of the 12 stored tag bits with the current tag input data. An active high MATCH output is generated when the valid bit is true and these two groups of data are the same for a given address. This high-speed MATCH signal, with tAVMV times as fast as 9 ns, provides the fastest possible enabling of secondary cache accesses. The three separate I/O status bits (VALID, DIRTY, and WT) can be configured for either dedicated or generic functionality, depending on the SFUNC input pin. With SFUNC low, the status bits are defined and used internally by the device, allowing easier determination of the validity and use of the given tag data. SFUNC high releases the defined internal status bit usage and control, allowing users to configure the status bit information to fit their system needs. A synchronous RESET pin, when held low at a rising clock edge, will reset all status bits in the array for easy invalidation of all tag addresses. The MCM67T415 also provides the option for burst ready (BRDY) generation within the cache tag itself, based upon MATCH, VALID bit, WT bit, and other external inputs provided by the user. This can significantly simplify cache controller logic and minimize cache decision time. Match and read operations are both asynchronous in order to provide the fastest access times possible, while write operations are synchronous for ease of system timing. The MCM67T415 uses a 5 V power supply on VCC and VSS, with separate VCCQ pins provided for the outputs to offer compliance with both 5 V TTL and 3.3 V LVTTL logic levels. The PWRDN pin offers a low-power standby mode, which provides significant system power savings. The MCM67T415 is offered in a space saving 80-pin thin quad flat pack (TQFP) package. * 16K x 15 Configuration: - 12 Tag Bits - Three Status Bits (Valid, Dirty, and WT) * Valid Bit used to Qualify Match Output * High-Speed Address-to-Match Comparison Times - 9/10/12 ns * BRDY Circuitry Included Inside the Cache-Tag for the Highest Speed Operation * Asynchronous Read/Match Operation and Synchronous Write and Reset Operation * Separate Write Enable for Tag Bits and Status Bits * Separate Output Enable for Tag Bits, Status Bits, and BRDY * Synchronous RESET Pin for Invalidation of all Tag Entries * Dual Chip Selects for Easy Depth Expansion with No Performance Degradation * I/O Pins Both 5 V TTL and 3.3 V LVTTL Compatible with VCCQ Pins * PWRDN Pin to Place Device in Low-Power Mode * Drop-In Replacement for IDT71215 * Packaged in an 80-Pin Thin Quad Flat Pack (TQFP)
Pentium is a trademark of Intel Corp.
This document contains information on a new product. Motorola reserves the right to change or discontinue this product without notice. 9/10/96
TQ PACKAGE TQFP CASE 917A-02
(c) Motorola, Inc. 1996 MOTOROLA FAST SRAM
MCM67T415 1
FUNCTIONAL BLOCK DIAGRAM
A0 - A13 REG
0 1
16K x 12 MEMORY TAG BITS
16K x 3 MEMORY STATUS BITS
E1 E2 REG DATA IN REGISTER SA SA DATA IN REGISTER
TDQ0 - TDQ11 GT
VALIDD DIRTYD WTD VALIDQ DIRTYQ WTQ
WRITE (pos) PULSE GENERATOR
WT WS K
REG
RESET (neg) PULSE GENERATOR COMPARE
GS
RESET PWRDN SFUNC MATCH W/R BRDYH BRDYD BRDY REG
BRDYG
MCM67T415 2
MOTOROLA FAST SRAM
PIN ASSIGNMENTS
VALIDD VCC VSS PWRDN E2 E1 WT WS VCC VSS RESET K GS GT BRDYG TDQ11 VSS TDQ10 VCCQ TDQ9 VSS VSS VSS VSS DIRTYD WTD A0 A1 A2 VCC VSS A3 A4 A5 A6 A7 VSS VSS VSS VSS 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 1 60 2 59 58 3 4 57 5 56 6 55 7 54 8 53 9 52 10 51 11 50 12 49 13 48 14 47 15 46 16 45 17 44 18 43 19 42 20 41 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 W/R BRDYH BRDYD A9 A10 A11 A12 A13 DIRTYQ TDQ0 VSS TDQ1 VCCQ TDQ2 TDQ3 A8 SFUNC VSS VSS VCC
VSS VSS VSS TDQ8 TDQ7 TDQ6 VALIDQ VCCQ VSS BRDY MATCH VSS VCCQ WTQ TDQ5 TDQ4 NC VSS VSS VSS
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
MOTOROLA FAST SRAM
*MCM67T415/D*
MCM67T415/D MCM67T415 3


▲Up To Search▲   

 
Price & Availability of MCM67T415

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X